FREE SHIPPING - US LOWER 48 STATES
Call or Text 239-935-8488
An Item Was Added To Cart!
X

Safe Way Treads Wear Like Iron!
Verified Purchase

I bought a set of these reflective treads for the new deck I built. They are still in great condition after two years of blistering SoCal summer heat and two winter downpours. We are having our house remodeled now, and workers carrying sacks of cement, drywall, lumber and sand are tromping on the stair treads, and they still hold up fine. We hose off our deck regularly as well and they have not come loose.

The Last Bath Mat You Will Ever Buy!
Verified Purchase

My only regret is not finding out about peel and stick bathtub mats 30 years ago. This mat is thin and sticks directly to the tub, so you can hardly tell it's there. Unlike suction cup mats that are bulky and have a tendency to slide around as well as get mildew underneath. Straightforward and simple installation, non-slip surface, and long length make this product a winner in all aspects. Everyone should own one of these.

Super Reflective - Holds Great!
Verified Purchase

Tape sticks to surface like it’s hanging on for dear life - definitely don’t need to worry about it coming off. The reflectiveness of this product is amazing blends in good with aluminum panels so it doesn’t stand out like a sore thumb but when the light hits it you definitely know it’s there super bright.

Continue Shopping

Case of 24 Mats - 16" x 40" WHITE Textured Non-Slip Adhesive Bathmat with Drain Cut Out - In Stock - Drop Ships


Case of 24 Mats - 16" x 40" WHITE Textured Non-Slip Adhesive Bathmat with Drain Cut Out - In Stock - Drop Ships

$311.80

Case of 24 Mats

16" Wide x 40" Adhesive Bathmat with Drain Cut Out Guaranteed Quality

Part # 4100-16X40-RW-CT

Flex Track® fine grade non-slip vinyl tub liner tape reduces the risk of slips and falls in wet, slippery areas. The non-slip yet non-abrasive tape is effective in showers, baths, swimming pools, health clubs, and other areas that require a safe and foot friendly surface. Industries: Hotels and motels, hospitality, consumer / homeowner, apartments and more.

Flex Track® White vinyl non-skid tape 16"x40" mat meets Prop 65, ADA, and OSHA standards.

 MANUFACTURED IN THE USA 

 

Installation InstructionsGuaranteed Quality

Apply to a smooth flat surface only and avoid all grout areas.

Before you begin, your tub/shower must be completely clean of all soap residue and thoroughly dry. Clean tub/shower with a biodegradable cleaner, avoiding solutions containing silicone or products that leave a residue or coating, including powdered cleaners.

  1. Clean hands thoroughly. Using your fingertips, peel back one to two inches of the paper backing along the edge of your mat to be placed closest to the drain. Slightly crease the paper, try to avoid touching the adhesive backing.
  2. Adhere the exposed adhesive end of your mat. With the exposed section in place, reach under the mat and gently peel the creased paper backing slowly off, while you continue to carefully and firmly rub over the entire surface of the mat from the middle out. Be sure all edges are properly adhered to the tub/shower surface.

Use of a rubber roller can aid in the adhesion of the mat.

Made in the USAFlex Track® 4100                                   

Issue Date: 12/1/2016 Version 1.2

DESCRIPTION

Jessup Flex Track® 4100 is an embossed anti-slip PVC that has been engineered with an aggressive adhesive system to adhere to a wide variety of surfaces. Available colors are clear, white, and sandstone.

APPLICATION

Jessup Flex Track® 4100 is designed for indoor non-skid applications that require long- term anchorage to a wide variety of flat surfaces. It has been successfully used in applications such as showers and tubs.

 PROPERTIES

PHYSICAL PROPERTIES

TEST METHODS

AVERAGE RESULTS

Thickness

PSTC - 133

-  Substrate

-  Pressure Sensitive adhesive

-  Release Liner

 

0.018 inch (0.457 mm)

0.002 inch  (0.051 mm)

0.007 inch  (0.178 mm)

Peel Adhesion to:

 

-  Stainless Steel

 

 

-  Powder coated surfaces *

 

 

-  Polyethylene

PSTC – 101

 

15 minute dwell

24 hour dwell

 

15 minute dwell

24 hour dwell

 

15 minute dwell

24 hour dwell

 

 

55 oz/in (66 N/100 mm)

75 oz/in  (82 N/100 mm)

 

40 oz/in (44 N/100 mm)

55 oz/in  (60 N/100 mm)

 

20 oz/in (22 N/100 mm)

25 oz/in (27 N/100 mm)

Shear Adhesion to:

 - Stainless Steel

PSTC – 107

 1/2” x 1/2” x 1000g

 

< 5 hours

Tack

PSTC - 6

Rolling Ball Tack

 

< 5 inches

* Color and lot variances of coated surfaces including paints, powder coatings, lacquers, stains, and other treatments may vary the performance of the tape and should be evaluated for the compatibility of the tape to the specific surface.

 

PROPERTIES

 

PHYSICAL PROPERTIES

TEST METHODS

AVERAGE RESULTS

Coefficient of Friction (Kinetic)

ASTM D1894

Dry      Rubber

Wet    Rubber

Wet    Leather

 

0.9

1.0

1.0

Service Temperature High

 

 

Low

 

14 days at 220°F

 

 

14 days at -20°F

No visible effects, moderate shrinkage and high elasticity

 

No visible effects

CHEMICAL PROPERTIES

REAGENT

RECOMMENDATION

Solvent Resistance (Product laminated to stainless steel panel and allowed to condition for

24 hours at room temperature before testing. Sample was covered with reagent to the point that edges of product are also exposed to the reagent. The product is exposed to reagent for one hour at room temperature, then reagent is removed and product is immediately tested for scrape resistances, delaminating, and other visual effects.)

 Water

10% Salt Water

Bleach

Trichloroethylene

25% Sulfuric Acid

1% Sodium Hydroxide

Unleaded Gasoline

Diesel Fuel

Hydraulic Fluid

50% Antifreeze in water

MEK

Mineral Spirits

99% IPA

Recommended

Recommended

Recommended

Not Recommended

Intermittent Contact Only

Recommended

Recommended

Recommended

Recommended

Recommended

Not Recommended

Recommended

Recommended

Note: While the data contained herein is believed to be reliable averages of the product’s properties, the data should not be used for specification purposes. Jessup Manufacturing cannot guarantee colors due to the variation in ink lots, manufacturing processes, etc. Sample colors may also vary as the samples may be shipped from different bundles or lots. Customers who desire specific performance data should contact Jessup Manufacturing Company for further recommendations.

WARRANTY

The determination of the suitability of this product for any specific use is solely the responsibility of the user. No representations, guarantees or warranties of any kind are made to the accuracy or suitability of information in this document to any specific applications.

 

Copyright 2016, Jessup Manufacturing Company. All rights reserved.

PLEASE READ IMPORTANT INFORMATION BELOWFast Shipping

All Orders ship between 2 and 5 business days unless otherwise stated in the description section of the PRODUCT PAGE or PRODUCT TITLE

Orders ship via the US Postal Service, FedEx or UPS based on item ordered and processing warehouse.

Products may ship from different warehouse locations.

(FREE SHIPPING) We Pay Shipping for orders in the Continental US Lower 48 States 

CANADA - Shipping costs for orders in the following Provinces are calculated by weight with a maximum of $35 USD. Alberta, British Columbia, Manitoba, New Brunswick, Ontario, Quebec, Saskatchewan. Please note these costs do not include any custom / border fees your country may charge. Actual shipping carrier will be based on product ordered and processing warehouse.

If there is an exception to your order, we will notify you via email.

Back ordered Items - If an Item becomes back ordered you will be notified regarding the estimated ship date.

If you have any questions, please contact us

Once your order is processed, shipping confirmation with tracking information will be emailed to you.

Prior to the application of any product, buyers must contact us to initiate a return within 14 days of receiving an item. On any returned item, Safe Way Traction will refund the cost of the item minus shipping and handling charges. Up to a 20 % restocking may apply. 

TUFF Coat products ship directly from the manufacturer and are not returnable.

Custom quoted orders and Made to Order products are non-returnable.

Deck strips are non-returnable.

No merchandise is to be returned without first contacting Safe Way Traction. Any authorized return merchandise must be carefully packed and in the same condition received. All returned merchandise must be shipped insured and freight prepaid. Some items may not be subject to return including, but not limited to, custom orders, discontinued items and large quantity orders. NO PARTIAL RETURNS ARE ACCEPTED.

Back to the top