An Item Was Added To Cart!

Safe Way Treads Wear Like Iron!
Verified Purchase

I bought a set of these reflective treads for the new deck I built. They are still in great condition after two years of blistering SoCal summer heat and two winter downpours. We are having our house remodeled now, and workers carrying sacks of cement, drywall, lumber and sand are tromping on the stair treads, and they still hold up fine. We hose off our deck regularly as well and they have not come loose.

The Last Bath Mat You Will Ever Buy!
Verified Purchase

My only regret is not finding out about peel and stick bathtub mats 30 years ago. This mat is thin and sticks directly to the tub, so you can hardly tell it's there. Unlike suction cup mats that are bulky and have a tendency to slide around as well as get mildew underneath. Straightforward and simple installation, non-slip surface, and long length make this product a winner in all aspects. Everyone should own one of these.

Super Reflective - Holds Great!
Verified Purchase

Tape sticks to surface like it’s hanging on for dear life - definitely don’t need to worry about it coming off. The reflectiveness of this product is amazing blends in good with aluminum panels so it doesn’t stand out like a sore thumb but when the light hits it you definitely know it’s there super bright.

Continue Shopping

MADE TO ORDER - Industrial Non-slip Deck, Step & Walkway Strips - Custom Quoted - Contact US for Current Pricing & Lead Times

MADE TO ORDER - Industrial Non-slip Deck, Step & Walkway Strips - Custom Quoted - Contact US for Current Pricing & Lead Times


All Deck Strips are NON-RETURNABLE

Made in the USA

Safe Way Traction's non-slip fiberglass flat safety strips are made with a proprietary blend of mineral abrasive epoxy grit that completely and safely covers surfaces to provide slip resistance, durability and a permanent anti-slip solution. They are very lightweight, easy to apply and perfect for just about any structurally sound surface.

  • Helps reduce slips & falls on a variety of applications
  • 2" or 4" widths/ 36" or 48" lengths 
  • Indoor and outdoor applications
  • Permanently fasten with screws and adhesive
  • Great for areas that anti slip tape will not stay adhered due to environment
  • Install any time of the year with screws
  • Available in medium & heavy duty grit / black or yellow
  • Lightweight, easy to apply and perfect for just about any structurally sound surface

 Custom lengths available.



    • Deck strips are not a weight bearing material and should only be applied to sound structures.
    • Fill any cracks, holes or depressions prior to installation.
    • Surfaces should be clean, dry and free from oil, grease, rust or any other foreign surface.
    • It is recommended that any painting or refinishing of surface be completed prior to installation.


    • Appropriate personal protection equipment: safety glasses, dust mask, gloves, ear protection, etc.
    • Tape measure, marking tool
    • Drill with proper bit size
    • Sandpaper, acetone, de-natured alcohol
    • Adhesive sealer and fasteners (see below)






    Drill Bit Required


    Stainless Steel,   1"-1.5" long




    7/64" diameter


    Masonry Screw with anchor if needed




    3/16" diameter


    Stainless Steel, 1"-1.5" Self Tapping




    3/8" diameter


    • Install deck strips on any structurally sound, clean, smooth and dry surface. Concrete: Fill and patch all holes making the step surface flat and smooth. If step is bowed use a cement filler to ensure the step is level. Wood: Replace any areas of wood this are bowed or severely worn, creating a flat, smooth, level surface. Metal: Remove any flaking rust or paint. Make certain that the surface is level and smooth.
    • Use a combination of adhesive and mechanical fasteners to ensure a safe and secure installation. If necessary, use proper anchor to achieve fastening to surface.
    • Determine placement of deck strips - side and edge holes should be predetermined and should not exceed a spacing of 18 inches between holes. Safe Way recommends a spacing of 12 inches on center on highly traveled areas.
    • Using proper drill bit size, drill pilot holes through the deck strip into the surface.
    • Using sandpaper, lightly scuff the underside of the deck strip and remove surface dust by wiping with de-natured alcohol and allow to dry. This will assist in creating a proper bond with the adhesive.
    • Apply a 1/2 inch to 3/4 inch bead of adhesive to the underside of the deck strip around the entire perimeter, being careful not to get too close to the edges. Do not apply adhesive over the pre-drilled holes.
    • Position the deck strip, carefully aligning the pre-drilled holes with the pilot holes.
    • Insert appropriate screw and tighten.
    • Clean any excessive adhesive as recommended by the sealant manufacturer.


    Deck strips can be cleaned by sweeping, using a general purpose industrial floor cleaner, stiff bristled brush or pressure sprayed up to 1000 psi.

    Examples of use:


    All Orders ship between 2 and 5 business days unless otherwise stated in the description section of the PRODUCT PAGE or PRODUCT TITLE

    Orders ship via the US Postal Service, FedEx or UPS based on item ordered and processing warehouse.

    Products may ship from different warehouse locations.

    (FREE SHIPPING) We Pay Shipping for orders in the Continental US Lower 48 States 

    CANADA - Shipping costs for orders in the following Provinces are calculated by weight with a maximum of $35 USD. Alberta, British Columbia, Manitoba, New Brunswick, Ontario, Quebec, Saskatchewan. Please note these costs do not include any custom / border fees your country may charge. Actual shipping carrier will be based on product ordered and processing warehouse.

    If there is an exception to your order, we will notify you via email.

    Back ordered Items - If an Item becomes back ordered you will be notified regarding the estimated ship date.

    If you have any questions, please contact us

    Once your order is processed, shipping confirmation with tracking information will be emailed to you.

    Prior to the application of any product, buyers must contact us to initiate a return within 14 days of receiving an item. On any returned item, Safe Way Traction will refund the cost of the item minus shipping and handling charges. Up to a 20 % restocking may apply. 

    TUFF Coat products ship directly from the manufacturer and are not returnable.

    Custom quoted orders and Made to Order products are non-returnable.

    Deck strips are non-returnable.

    No merchandise is to be returned without first contacting Safe Way Traction. Any authorized return merchandise must be carefully packed and in the same condition received. All returned merchandise must be shipped insured and freight prepaid. Some items may not be subject to return including, but not limited to, custom orders, discontinued items and large quantity orders. NO PARTIAL RETURNS ARE ACCEPTED.

    Back to the top