18" X 60' Roll WHITE Vinyl Tub & Shower Non-Slip Tape - In Stock
18" X 60' Roll WHITE Vinyl Tub & Shower Non-Slip Tape - In Stock
Couldn't load pickup availability
- Description
- Technical Data
- Shipping Information
- Return Policy
18" x 60' Roll WHITE Tub & Shower Tape
Flex Track® fine grade non-slip vinyl tape reduces the risk of falls in wet, slippery areas. The non-slip yet non-abrasive tape is effective in showers, baths, swimming pools, health clubs, and other areas that require a safe and foot friendly surface.
Flex Track® White vinyl non-skid tape 18"x 60' meets Prop 65, ADA, and OSHA standards.
Flex Track® 4100
Issue Date: 12/1/2016 Version 1.2
DESCRIPTION
Jessup Flex Track® 4100 is an embossed anti-slip PVC that has been engineered with an aggressive adhesive system to adhere to a wide variety of surfaces. Available colors are clear, white, and sandstone.
APPLICATION
Jessup Flex Track® 4100 is designed for indoor non-skid applications that require long- term anchorage to a wide variety of flat surfaces. It has been successfully used in applications such as showers and tubs.
PROPERTIES
PHYSICAL PROPERTIES | TEST METHODS | AVERAGE RESULTS |
Thickness | PSTC - 133 - Substrate - Pressure Sensitive adhesive - Release Liner |
0.018 inch (0.457 mm) 0.002 inch (0.051 mm) 0.007 inch (0.178 mm) |
Peel Adhesion to:
- Stainless Steel
- Powder coated surfaces *
- Polyethylene | PSTC – 101
15 minute dwell 24 hour dwell
15 minute dwell 24 hour dwell
15 minute dwell 24 hour dwell |
55 oz/in (66 N/100 mm) 75 oz/in (82 N/100 mm)
40 oz/in (44 N/100 mm) 55 oz/in (60 N/100 mm)
20 oz/in (22 N/100 mm) 25 oz/in (27 N/100 mm) |
Shear Adhesion to: - Stainless Steel | PSTC – 107 1/2” x 1/2” x 1000g |
< 5 hours |
Tack | PSTC - 6 Rolling Ball Tack |
< 5 inches |
* Color and lot variances of coated surfaces including paints, powder coatings, lacquers, stains, and other treatments may vary the performance of the tape and should be evaluated for the compatibility of the tape to the specific surface.
PROPERTIES
PHYSICAL PROPERTIES | TEST METHODS | AVERAGE RESULTS |
Coefficient of Friction (Kinetic) | ASTM D1894 Dry Rubber Wet Rubber Wet Leather |
0.9 1.0 1.0 |
Service Temperature High
Low |
14 days at 220°F
14 days at -20°F | No visible effects, moderate shrinkage and high elasticity
No visible effects |
CHEMICAL PROPERTIES | REAGENT | RECOMMENDATION |
Solvent Resistance (Product laminated to stainless steel panel and allowed to condition for 24 hours at room temperature before testing. Sample was covered with reagent to the point that edges of product are also exposed to the reagent. The product is exposed to reagent for one hour at room temperature, then reagent is removed and product is immediately tested for scrape resistances, delaminating, and other visual effects.) | Water 10% Salt Water Bleach Trichloroethylene 25% Sulfuric Acid 1% Sodium Hydroxide Unleaded Gasoline Diesel Fuel Hydraulic Fluid 50% Antifreeze in water MEK Mineral Spirits 99% IPA | Recommended Recommended Recommended Not Recommended Intermittent Contact Only Recommended Recommended Recommended Recommended Recommended Not Recommended Recommended Recommended |
Note: While the data contained herein is believed to be reliable averages of the product’s properties, the data should not be used for specification purposes. Jessup Manufacturing cannot guarantee colors due to the variation in ink lots, manufacturing processes, etc. Sample colors may also vary as the samples may be shipped from different bundles or lots. Customers who desire specific performance data should contact Jessup Manufacturing Company for further recommendations.
WARRANTY
The determination of the suitability of this product for any specific use is solely the responsibility of the user. No representations, guarantees or warranties of any kind are made to the accuracy or suitability of information in this document to any specific applications.
Copyright 2016, Jessup Manufacturing Company. All rights reserved.
PLEASE READ IMPORTANT INFORMATION BELOW
Orders ship between 1 and 3 business days unless otherwise stated in the description section of the PRODUCT PAGE or PRODUCT TITLE
CUSTOM Made to Order Products: Custom orders will state Custom in the product title and description section. See the description section for estimated lead times. Custom made to order products cannot be cancelled.
Orders ship via the US Postal Service, FedEx or UPS based on item ordered and processing warehouse.
Products may ship from different warehouse locations.
*** We pay Shipping on all orders in the Continental US Lower 48 States.
CANADA - Shipping costs for orders in the following Provinces are calculated by weight. Alberta, British Columbia, Manitoba, New Brunswick, Ontario, Quebec, Saskatchewan. Please note these costs do not include any custom / border fees your country may charge. Actual shipping carrier will be based on product ordered and processing warehouse.
If there is an exception to your order, we will notify you via email.
Back ordered Items - If an Item becomes back ordered you will be notified regarding the estimated ship date.
If you have any questions, please contact us
Once your order is processed, shipping confirmation with tracking information will be emailed to you.
Prior to the application of any product, buyers must contact us to initiate a return within 14 days of receiving an item. On any returned item, Safe Way Traction will refund the cost of the item minus shipping and handling charges. Up to a 20 % restocking may apply.
The following orders are non-returnable.
Any product that is stated in the product title as Special Offer, Special Order, Bulk Savings or Custom Quoted (Made to Order products).
Merchandise is not to be returned without first contacting Safe Way Traction. Any authorized return merchandise must be carefully packed and in the same condition received. All returned merchandise must be shipped insured and freight prepaid. Partial returns are not accepted.
