..... Safety under foot .....
239-935-8488
An Item Was Added To Cart!
X

Safe Way Treads Wear Like Iron!
Verified Purchase

I bought a set of these reflective treads for the new deck I built. They are still in great condition after two years of blistering SoCal summer heat and two winter downpours. We are having our house remodeled now, and workers carrying sacks of cement, drywall, lumber and sand are tromping on the stair treads, and they still hold up fine. We hose off our deck regularly as well and they have not come loose.

The Last Bath Mat You Will Ever Buy!
Verified Purchase

My only regret is not finding out about peel and stick bathtub mats 30 years ago. This mat is thin and sticks directly to the tub, so you can hardly tell it's there. Unlike suction cup mats that are bulky and have a tendency to slide around as well as get mildew underneath. Straightforward and simple installation, non-slip surface, and long length make this product a winner in all aspects. Everyone should own one of these.

Super Reflective - Holds Great!
Verified Purchase

Tape sticks to surface like it’s hanging on for dear life - definitely don’t need to worry about it coming off. The reflectiveness of this product is amazing blends in good with aluminum panels so it doesn’t stand out like a sore thumb but when the light hits it you definitely know it’s there super bright.

Continue Shopping

6" X 24" BLACK with REFLECTIVE Stripe Abrasive Tread - Case of 48


6" X 24" BLACK with REFLECTIVE Stripe Abrasive Tread - Case of 48

$219.95

THIS ITEM MUST SHIP VIA UPS 

6" x 24" Tread     Color: Black with Reflective Stripe     Pkg of 48 Treads

Certified by the National Floor Safety Institute

HELP AVOID SLIPS AND FALLS with this easy to install tape.

  • Silicon carbide grit provides consistent slip resistance and durability.

  • This non-skid tape is NFSI certified for High Traction and meets Prop 65, ADA, and OSHA standards.

  • Aggressive adhesive system for longevity of application

  • Helps provide a solution to slip and fall prevention in a variety of applications.

Safety Track 3100 commercial grade non-skid grit tape combines a high-traction surface and an aggressive adhesion system for general purpose use on ramps, ladders, loading docks, airline decks, cargo holds plus many other applications.

The anti slip tape was engineered to exceed OSHA Standards - providing a durable, consistent non-slip surface. It is a commercial grade non-skid grit tape (sandpaper type) with adhesive backing, designed for most general purpose applications. It is an excellent choice for most non slip applications in both the home and work environments. Additionally, the use of silicon carbide grit ensures longevity for indoor and outdoor applications. Long life, durable, and resistant to heavy traffic, water, and grease. 

  MANUFACTURED IN THE USA 

     Safety Track 3100    Application Instructions

    • Testing of adhesion to surface should be done before installation.
    • Do not apply when surface temperature is below 50 degrees Fahrenheit.
    • Fill in cracks, seal porous surfaces and repair to a smooth finish, as required, avoid application to grout areas.
    • Always apply to clean, dry, wax and oil-free surface. Allow ample time for drying.
    • Peel off protective release paper.
    • Press tape to prepared surface. Bond is increased by using a rubber hand roller.
    • Ready for immediate use, no need to wait.
    • Keep tape clean. Use mild floor cleaners as directed.
    • Application to porous surfaces in not recommended.

    Made in the USASafety Track®  3100                                        Issue Date: 11/1/2015  Version 1.1

    DESCRIPTION      

    Jessup Safety Track® 3100 is a commercial grade non-skid silicon carbide grit tape that has been designed to meet OSHA standards for general purpose anti-slip surface applications.

    APPLICATION

    Jessup Safety Track® 3100 is designed for indoor and outdoor applications that require long-term anchorage to a wide variety of surfaces.  It has been successfully used in a wide range of markets including OEM, Action Sports, and Building Safety. 3100 is NFSI certified for “High Traction”.

     

    PROPERTIES

    PHYSICAL PROPERTIES

    TEST METHODS

    AVERAGE RESULTS

      Thickness

      PSTC - 133

    -  Substrate

    -  Pressure Sensitive adhesive

    -  Release Liner

    0.020 inch  (0.508 mm)

    0.002 inch  (0.051 mm)

    0.006 inch  (0.152 mm)

      Peel Adhesion to:

      Stainless Steel

     

     Powder coated surfaces   *

     

     Polyethylene

     

      PSTC – 101

       15 minute dwell

      24 hour dwell

       15 minute dwell

      24 hour dwell

       15 minute dwell

      24 hour dwell

     

     

    90 oz/in (99 N/100 mm)

    115 oz/in (126 N/100 mm)

    80 oz/in (88 N/100 mm)

    85 oz/in  (93 N/100mm)

    40 oz/in (44 N/100 mm)

    50 oz/in (55 N/100 mm)

     

      Shear Adhesion to:

       - Stainless Steel

     

      PSTC – 107

       1/2” x 1/2” x 1000g

      

    5 hours

      Tack

      PSTC - 6

      Rolling Ball Tack

     

    < 3 inches

     * Color and lot variances of coated surfaces including paints, powder coatings, lacquers, stains, and other treatments may vary the performance of the tape and should be evaluated for the compatibility of the tape to the specific surface.

     

     PROPERTIES

    PHYSICAL PROPERTIES

    TEST METHODS

    AVERAGE RESULTS

    Coefficient of Friction (Kinetic)

    ASTM D1894

    Dry      Rubber

    Wet     Rubber

    Dry      Leather

    Wet    Leather

    1.2

    1.1

    1.0

    1.4

    Service Temperature

    High

     

    Low

     

     

    14 days at 175°F

     

     14 days at -20°F

     

    No visible effects, slight material shrinkage at high temperatures.

     

    No visible effects               

     

    CHEMICAL PROPERTIES

    REAGENT

    RECOMMENDATION

    Solvent Resistance (Product laminated to stainless steel panel and allowed to condition for 24 hours at room temperature before testing.  Sample was covered with reagent to the point that edges of product are also exposed to the reagent.  The product is exposed to reagent for one hour at room temperature, then reagent is removed and product is immediately tested for scrape resistances, delaminating, and other   visual effects.)

    Water

    10% Salt Water

    Bleach

    Trichloroethylene

    25% Sulfuric Acid

    1% Sodium Hydroxide

    Unleaded Gasoline

    Diesel Fuel

    Hydraulic Fluid

    50% Antifreeze in water

    MEK

    Mineral Spirits   99% IPA

     Recommended

    Recommended

    Recommended

    Not Recommended

    Recommended

    Intermittent Contact Only

    Intermittent Contact Only

    Recommended

    Recommended

    Recommended

    Not Recommended

     Recommended 

    Recommended

    Note: While the data contained herein is believed to be reliable averages of the product’s properties, the data should not be used for specification purposes.  Test Data and results contained in this document are for general guidance only and should not be used by customers to establish designs and specifications.  Customers who desire specific performance data should contact Jessup Manufacturing Company for further recommendations.

     

    WARRANTY

    The determination of the suitability of this product for any specific use is solely the responsibility of the user.  No representations, guarantees or warranties of any kind are made to the accuracy or suitability of information in this document to any specific applications.  Jessup warrants its products to be free from defects but limits its obligation to replacement of products that have been proven, to Jessup’s satisfaction, to be defective.  This warranty is non-transferable and only applies to customers buying directly from Jessup.  Jessup is not liable for any loss, damage, expenses, or consequential damages arising in connection with the use of this product.

     Copyright 2015, Jessup Manufacturing Company.  All rights reserved.

    Fast ShippingPLEASE READ IMPORTANT INFORMATION BELOW

    • Most orders ship between 1 and 5 business days unless otherwise stated. See description section of product marked in RED for additional information if applicable.
    • Items ship via US Postal Service or UPS.
    • Products may ship from different warehouse locations - based on the item ordered.
    • Shipping Options are calculated during the checkout process.
    • Hawaii, Alaska, Virgin Islands, Puerto Rico & CanadaUPS is the only shipping for heavy weight items (Tuff Coat products, fiberglass treads, aluminum treads, etc.). Contact us with questions.
    • CanadaPlease check with your Customs Office as duty and import charges are not included in the shipping cost.
    • Back ordered Items - If an Item becomes back ordered you will be notified regarding the estimated ship date.

    If there is an exception to your order we will notify you via email.

    If you have any questions on your order please contact us or message us via facebook

    Once your order is processed, shipping confirmation with tracking information will be emailed to you.

    Back to the top