24" X 60' Roll BLACK Abrasive 80 Grit Non-Slip Tape
24" X 60' Roll BLACK Abrasive 80 Grit Non-Slip Tape
Couldn't load pickup availability
- Description
- Application
- Technical Data
- Shipping Information
- Return Policy
24" x 60' Roll Color: Black Item No. 3100-24 - UPC 717364312402
HELP AVOID SLIPS AND FALLS with this easy to install tape.
-
Silicon carbide grit provides consistent slip resistance and durability.
-
This non-skid tape is NFSI certified for High Traction and meets Prop 65, ADA, and OSHA standards.
-
Aggressive adhesive system for longevity of application
- Helps provide a solution to slip and fall prevention in a variety of applications.
Safety Track 3100 commercial grade non-skid grit tape combines a high-traction surface and an aggressive adhesion system for general purpose use on ramps, ladders, loading docks, airline decks, cargo holds plus many other applications.
The anti slip tape was engineered to exceed OSHA Standards - providing a durable, consistent non-slip surface. It is a commercial grade non-skid grit tape (sandpaper type) with adhesive backing, designed for most general purpose applications. It is an excellent choice for most non slip applications in both the home and work environments. Additionally, the use of silicon carbide grit ensures longevity for indoor and outdoor applications. Long life, durable, and resistant to heavy traffic, water, and grease.
MANUFACTURED IN THE USA
Application Instructions
- Testing of adhesion to surface should be done before installation.
- Do not apply when surface temperature is below 50 degrees Fahrenheit.
- Fill in cracks, seal porous surfaces and repair to a smooth finish, as required, avoid application to grout areas.
- Always apply to clean, dry, wax and oil-free surface. Allow ample time for drying.
- Peel off protective release paper.
- Press tape to prepared surface. Bond is increased by using a rubber hand roller.
- Ready for immediate use, no need to wait.
- Keep tape clean. Use mild floor cleaners as directed.
- Application to porous surfaces in not recommended.
Safety Track® 3100 Issue Date: 11/1/2015 Version 1.1
DESCRIPTION
Jessup Safety Track® 3100 is a commercial grade non-skid silicon carbide grit tape that has been designed to meet OSHA standards for general purpose anti-slip surface applications.
APPLICATION
Jessup Safety Track® 3100 is designed for indoor and outdoor applications that require long-term anchorage to a wide variety of surfaces. It has been successfully used in a wide range of markets including OEM, Action Sports, and Building Safety. 3100 is NFSI certified for “High Traction”.
PROPERTIES
PHYSICAL PROPERTIES | TEST METHODS | AVERAGE RESULTS |
Thickness | PSTC - 133 - Substrate - Pressure Sensitive adhesive - Release Liner | 0.020 inch (0.508 mm) 0.002 inch (0.051 mm) 0.006 inch (0.152 mm) |
Peel Adhesion to: Stainless Steel
Powder coated surfaces *
Polyethylene
| PSTC – 101 15 minute dwell 24 hour dwell 15 minute dwell 24 hour dwell 15 minute dwell 24 hour dwell
|
90 oz/in (99 N/100 mm) 115 oz/in (126 N/100 mm) 80 oz/in (88 N/100 mm) 85 oz/in (93 N/100mm) 40 oz/in (44 N/100 mm) 50 oz/in (55 N/100 mm)
|
Shear Adhesion to: - Stainless Steel
| PSTC – 107 1/2” x 1/2” x 1000g |
5 hours |
Tack | PSTC - 6 Rolling Ball Tack |
< 3 inches |
* Color and lot variances of coated surfaces including paints, powder coatings, lacquers, stains, and other treatments may vary the performance of the tape and should be evaluated for the compatibility of the tape to the specific surface.
PROPERTIES
PHYSICAL PROPERTIES | TEST METHODS | AVERAGE RESULTS |
Coefficient of Friction (Kinetic) | ASTM D1894 Dry Rubber Wet Rubber Dry Leather Wet Leather | 1.2 1.1 1.0 1.4 |
Service Temperature High
Low
|
14 days at 175°F
14 days at -20°F
| No visible effects, slight material shrinkage at high temperatures.
No visible effects
|
CHEMICAL PROPERTIES | REAGENT | RECOMMENDATION |
Solvent Resistance (Product laminated to stainless steel panel and allowed to condition for 24 hours at room temperature before testing. Sample was covered with reagent to the point that edges of product are also exposed to the reagent. The product is exposed to reagent for one hour at room temperature, then reagent is removed and product is immediately tested for scrape resistances, delaminating, and other visual effects.) | Water 10% Salt Water Bleach Trichloroethylene 25% Sulfuric Acid 1% Sodium Hydroxide Unleaded Gasoline Diesel Fuel Hydraulic Fluid 50% Antifreeze in water MEK Mineral Spirits 99% IPA | Recommended Recommended Recommended Not Recommended Recommended Intermittent Contact Only Intermittent Contact Only Recommended Recommended Recommended Not Recommended Recommended Recommended |
Note: While the data contained herein is believed to be reliable averages of the product’s properties, the data should not be used for specification purposes. Test Data and results contained in this document are for general guidance only and should not be used by customers to establish designs and specifications. Customers who desire specific performance data should contact Jessup Manufacturing Company for further recommendations.
WARRANTY
The determination of the suitability of this product for any specific use is solely the responsibility of the user. No representations, guarantees or warranties of any kind are made to the accuracy or suitability of information in this document to any specific applications. Jessup warrants its products to be free from defects but limits its obligation to replacement of products that have been proven, to Jessup’s satisfaction, to be defective. This warranty is non-transferable and only applies to customers buying directly from Jessup. Jessup is not liable for any loss, damage, expenses, or consequential damages arising in connection with the use of this product.
Copyright 2015, Jessup Manufacturing Company. All rights reserved.
PLEASE READ IMPORTANT INFORMATION BELOW
Orders ship between 1 and 3 business days unless otherwise stated in the description section of the PRODUCT PAGE or PRODUCT TITLE
CUSTOM Made to Order Products: Custom orders will state Custom in the product title and / or description section. See the description section for estimated lead times. Custom made to order products cannot be cancelled.
Orders ship via the US Postal Service, FedEx or UPS based on item ordered and processing warehouse.
Products may ship from different warehouse locations.
*** We pay Shipping on all orders in the Continental US Lower 48 States.
CANADA - Shipping costs for orders in the following Provinces are calculated by weight. Alberta, British Columbia, Manitoba, New Brunswick, Ontario, Quebec, Saskatchewan. Please note these costs do not include any custom / border fees your country may charge. Actual shipping carrier will be based on product ordered and processing warehouse.
If there is an exception to your order, we will notify you via email.
Back ordered Items - If an Item becomes back ordered you will be notified regarding the estimated ship date.
If you have any questions, please contact us
Once your order is processed, shipping confirmation with tracking information will be emailed to you.
Prior to the application of any product, buyers must contact us to initiate a return within 14 days of receiving an item. On any returned item, Safe Way Traction will refund the cost of the item minus shipping and handling charges. Up to a 20 % restocking may apply.
The following orders are non-returnable.
Any product that is stated in the product title as Special Offer, Special Order, Bulk Savings or Custom Quoted (Made to Order products).
Merchandise is not to be returned without first contacting Safe Way Traction. Any authorized return merchandise must be carefully packed and in the same condition received. All returned merchandise must be shipped insured and freight prepaid. Partial returns are not accepted.
